ROAD / VIDEO GUIDE
How to Install Your Vittoria Corsa PRO Tire with Air-Liner Light Road
Follow this step-by-step video guide to install a Vittoria Corsa PRO road tyre with the Air-Liner Light Road insert. Learn how to prepare your tubeless wheel, position the insert, mount the tyre, add sealant and complete the setup checks.
Video
Before you start - Important safety information
Before installation, verify that your tyre, rim, valve and insert are compatible. Check that the rim tape is correctly installed and undamaged. Follow the current Vittoria product instructions and the tyre/rim manufacturer’s pressure limits. Technical approval is required before publication.
Your recipe for the perfect set-up
What You'll Need
Tick off your products and tools as you prepare them.
☐ 1 × Vittoria Corsa PRO road tyre
☐ 1 × Vittoria Air-Liner Light Road insert
☐ 1 × compatible tubeless-ready wheel and rim
☐ 1 × compatible tubeless valve
☐ Vittoria tubeless sealant
☐ Hand or floor pump
☐ Vittoria Universal Tyre Levers
☐ Water and a clean cloth
Gather the Corsa PRO tire, Air-Liner Light Road insert, compatible wheel, tubeless valve and installation products shown in the video.
Inspect the rim tape and confirm that it is correctly installed and undamaged before mounting the tyre.
Insert the compatible tubeless valve through the rim hole and secure it following the valve manufacturer’s instructions.
Place the first bead of the Corsa PRO tire onto the rim, working progressively around the wheel.
Fit the insert inside the tire and rim channel as demonstrated, checking that it sits correctly and is not twisted.
The video shows the insert being wetted with water to help with positioning. Avoid twisting or damaging the insert.
Work the remaining tire bead onto the rim. If necessary, use Vittoria Universal Tire Levers carefully, as demonstrated.
Inflate the tire to seat the beads fully against the rim. Follow approved pressure limits and check the bead seating.
The video demonstrates removing the valve core and adding Vittoria tubeless sealant through the valve. Confirm the correct quantity for your setup.
Reinstall the valve core, inflate as required, rotate the wheel to distribute sealant and check tire seating, pressure and air retention before riding.